Conceal Textured Caulk - (10) 30oz Tubes - FREE SHIPPING
Sashco Conceal Textured Caulk Sealant for log homes
If you are looking for the least visible way to caulk and seal around the logs in your home, Sashco Conceal Textured Caulk is the way to go. This elastic and versatile caulk stretches and compresses as logs move, ensuring that the elements and insects stay out of your log home for years to come. Conceal Textured Caulk comes in several colors to match today’s log home stains, so that you can’t tell where the log ends and the caulk begins!
Sashco Conceal Textured Caulk Features and Benefits:
- Won't crack, peel or pull away
- Combined color and texture blends well with logs
- Comes in several colors, and is also paintable
- Excellent sealant for milled or hand-crafted log structures
- Use in stacking, Swedish cope, tongue & groove, or for filling in checks
- Can be used on new or older log structures
- Easy to apply, and tack-free within an hour
- Compatible with most log preservative treatments
- Highly water resistant during application
- Cleans up with soap and water
- Limited lifetime warranty
Sashco Conceal Textured Chinking Coverage Rates per 29oz Case:
¼'' x ½'' Wide Chinking Joint = 308 Lineal Feet
¼'' x ¾'' Wide Chinking Joint = 231 Lineal Feet
½'' x 1'' Wide Chinking Joint = 154 Lineal Feet
(Not to be considered specifications)
Color: Prairie Gold, Harvest Wheat, Warm Honey,
Golden Mesa, Canyon Wall, Santa Fe Trail, and Red
Packaging: 10.5 oz. plastic cartridges, 30 oz.
cartridges, and 5-gallon straight-sided pails. (Not all
colors are available in all sizes.)
Water Resistance: In most conditions, Conceal
forms a water resistant skin within 4 hours, depending
on humidity and temperature. If applied in temperatures
lower than 50°F and/or in relative humidity
higher than 70%, Conceal must be covered with
plastic sheeting for 3-5 days before exposure to rain.
Application Range: 40°F - 90°F (Surface temperature).
Ideal range: 50°F - 90°F.
Service Range: -30°F - 250°F
Paintability: Conceal is paintable with latex coatings
in 4 hours, with oil-based coatings in 5 days.
Compatibility: Conceal will adhere to woods
treated with most preservatives including borates**,
pentachlorophenol, and copper compounds. Conceal
is also compatible with insulating glass sealants and
most building materials, including foam insulation.
Shelf Life: 18 months from date on carton when
stored at room temperature.
Specifications: Passes C834-76, the performance
requirements of TT-S-00230B and ASTM C-920.
Meets FHA requirements.
** Some borate wood preservatives contain glycols
or other agents that could interfere with adhesion.
Sashco’s PeneTreat contains no glycols.
VOC: 4% by weight, max.
Cure-Through Time: 3 weeks (1/2” thickness, 70°F, 50% relative
Extrusion Rate: 1100 g/min (1/8” orifice at 40 psi)
Freeze-Thaw: Passes 5 cycles (0°F - 70°F)
Hardness (Shore A): 20 (21-day cure)
Elongation @ Break: 550%
Solid Wt. %: 73%
Solid Vol. %: 71%
Tack-Free Time: Less than 1 hour
Water Resistance: No washout (4 hours; 40°F, 50% relative humidity)
Discoloration Passes ASTM C834-76
Snow: Be cautious of areas where snow builds up around the structure
and remains for extended periods of time. Snow removal is recommended
for these areas to ensure the ultimate adhesion of Conceal.
Notice: We will test any stain to determine compatibility with
Conceal. Just call and send us a sample of the stain you want tested.
Test results available in a minimum of 6 weeks.
The data reported here are believed to be reliable. No warranty is
made or implied concerning the accuracy or the results obtained from