RENT AN AIR POWERED CAULKING / CHINKING GUN AND MAKE YOUR PROJECT A LOT EASIER!

Rent this air assisted gun that works great for installing large amounts of chinking or caulking material. It has a 2'' barrel diameter and an 18'' barrel length. It is designed to be used with 5 gallon buckets.

How to Rent:

This bulk-loading caulk gun can be purchased, used and returned at a 50% discount! Same as renting it, but no time limitation! Just return the gun in a clean, undamaged condition (free of all caulking, residue, and rust free).

Main Features

Designed and built for repetitive work

Provide even flow without interruption

3-way air valve for instant pressure release

Full porting to prevent piston upset

Dent-resistant steel barrels.

Air pressure regulators available as an extra

Discharge the most viscous materials at high-speed and in large volume

Perfect, even flow, without interruption

Recommended for repetitive work where joints are uniform in size and shape

Requires minimal physical effort

More:

Air-Powered Standard Line - Quart Bulk Air Gun

Industry: Serious Sealant Applicator. Air Powered Standard. Pressure Generated: 120 psi

Best for most popular size, Capacity: 20 oz

Material Type: All Single & Slow Cure Two Component, Drive Type: Single Action Air.

Barrel Diameter (inches): 2, Barrel Length (inches): 14

Pressure Generated: 120 psi

Capacity: 20 oz

Material Type: All Single & Slow Cure Two Component,

Drive Type: Single Action Air.

Barrel Diameter (inches): 2,

Barrel Length (inches): 14



The Fine Print:

RISK OF LOSS OR DAMAGE. The Customer assumes all risks of loss or damage to the equipment from any cause, and agrees to return it to the Company in the condition received from the Company, with the exception of normal wear and tear. The Company or their appointed agent will determine normal wear and tear. All determinations made by the Company are final.

CARE AND OPERATION OF EQUIPMENT. The equipment may only be used and operated in a careful and proper manner. Its use must comply with all laws, ordinances, and regulations relating to the possession, use, or maintenance of the equipment, including registration and/or licensing requirements, if any.

FAILURE TO PERFORM If the equipment fails to perform after the initial acceptance it will be the responsibility of the customer to repair and correct the problem. The Company will not be held responsible for any failure of equipment for any reason and the equipment will remain on rental unless a dispensation is granted in writing by the Company to waive the rental fees for the period of non-performance. The company will not be held responsible for any errors or omissions due to the Customer’s lack of operational or technical capability.

WARRANTY. The Company makes no warranties; express or implied, as to the equipment rented. The Customer assumes the responsibility for the condition of the equipment.