| || |
PC-7® is a heavy duty paste epoxy with unlimited uses for bonding, sealing and filling that is designed for the tough job. Formulated for maximum strength, this paste epoxy allows ample working time for large jobs, and cures for service in 12-24 hours. You can shape and mold the epoxy and fill large gaps or voids easily. Simple 1:1 mix. Cured epoxy can be drilled, machined, tooled and painted. No job is too big for PC-7®. Bonds to unlike surfaces. “The Powerhouse of Repair Products.”
PC-7® is the tough job epoxy! This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7® formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High “wet grab” or tack of PC-7® Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
Bonds most everything to anything.
***Note: PC-7® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.
***Note: Most epoxies are temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures. Speed cure with artificial heat.
Denatured alcohol is excellent for smoothing applied PC-7®. Also use Denatured alcohol to clean surfaces before applying.
After cure: Paint Drill, Machine, Sand, File, Tap, or Saw.
PC-7® has hundreds, if not thousands, of uses.
You May Also Need...
Recently Viewed Items...
Best Prices on Log Home Supplies!
Copyright © 2008 Western Log Home Supply - All rights reserved
PC-7® Heavy Duty Paste Epoxy ( A + B approx. 1 gal. ) = 1 case