How do I use a follow plate?

These handy accessories fit snugly inside 2-gallon or 5-gallon pails. There is a threaded ring in the center to accept a 2" diameter bulk guns such as the DL-45 or DL-59 series. It has has the added advantage of keeping air and other contaminants out of the caulking.

To operate, place the Follow Plate directly into the caulking and press down firmly to remove air pockets.

Remove the front cap from gun and advance the rod as far forward as it will go.

Thread the gun into the Plate.

While exerting pressure down onto the plate, and pressing on the recoil or thumb release, pull back on the rod to fill the gun.

When full, unthread the gun from the plate and replace the cap and nozzle on the gun.

Cover the opening on the follow plate with a piece of plastic to limit material contamination and curing between fills.