The New Steel Follow Plate speeds up the loading of caulk and chinking from 5 Gallon tapered pails. The new steel follow plate will also work with the old straight-sided pail design. It is designed for use with bulk loading 2" Diameter Guns by Albion. Follow plates help load all the chinking or caulk along the sides of straight sided pails while keeping the tip of your caulk gun nozzle clean and ready to use.
The Steel Follow Plate Includes an Adapter for Albion Bulk Guns
DIRECTIONS: Open pail and place Follow Plate directly on top of material (after mixing, if necessary). Press it down firmly to eliminate air pockets. Remove front cap from gun and advance the rod as far forward as it will go. Thread the gun into the Plate. While exerting pressure down onto the plate, pull back on the rod to fill the gun. When full, unthread the gun and replace the cap and nozzle on the gun. Cover the opening on the follow plate with a piece of plastic to limit material contamination and curing between fills.
Barrel Diameter (inches): 2"
Barrel Length (inches): All
Our Steel Follow Plate works with the following bulk and air loading guns - 1 Qt. Bulk Loading Gun and 1 Qt. Bulk Loading Air Gun
The New Steel Follow Plate speeds up the loading of caulk and chinking from 5 Gallon tapered pails. The new steel follow plate will also work with the old straight-sided pail design. It is designed for use with bulk loading 2" Diameter Guns by Albion. Follow plates help load all the chinking or caulk along the sides of straight sided pails while keeping the tip of your caulk gun nozzle clean and ready to use.
The Steel Follow Plate Includes an Adapter for Albion Bulk Guns
DIRECTIONS: Open pail and place Follow Plate directly on top of material (after mixing, if necessary). Press it down firmly to eliminate air pockets. Remove front cap from gun and advance the rod as far forward as it will go. Thread the gun into the Plate. While exerting pressure down onto the plate, pull back on the rod to fill the gun. When full, unthread the gun and replace the cap and nozzle on the gun. Cover the opening on the follow plate with a piece of plastic to limit material contamination and curing between fills.
Barrel Diameter (inches): 2"
Barrel Length (inches): All
Our Steel Follow Plate works with the following bulk and air loading guns - 1 Qt. Bulk Loading Gun and 1 Qt. Bulk Loading Air Gun